Health Ranger reveals the open source revolution in decentralized food production: FoodRising.org

December 20th, 2014

FAKE NEWS for the Zionist agenda

(NaturalNews) Thank you for your patience in awaiting this announcement. Details are available now at www.FoodRising.org

You can visit the website now and see the 3-minute teaser video that shares more details about the revolutionary low-tech innovations we’ll be releasing open source in 2015.

This is all part of the non-profit Consumer Wellness Center (www.ConsumerWellness.org) where I serve as the executive director. Your support has made all this possible, and we didn’t even need fundraising to make this happen!

Essentially, what we are going to be announcing is a series of important innovations and solutions that can be 3D printed at very low cost and which use no electricity or electronics to operate. Some minor assembly will be required after printing the parts.

These innovations will allow anyone, anywhere in the world, to:

• Easily grow better-than-organic foods at very low cost and with very little effort, using a fraction of the water use of conventional agriculture. We’re talking about lettuce, strawberries, tomatoes, potatoes, root vegetables, greens and much more for mere pennies rather than high dollars. Remember, this innovation grows food using no electricity, no pumps, no motors and no soil. There’s also no weeding. You will, of course, need your own seeds and sunlight.

• Boost the mineral content of these foods to extraordinary levels, producing high-zinc, high-selenium, high-magnesium plants at laboratory-validated levels that vastly outpace store-bought organic produce. With this system, you will be able to grow the food that contains the personalized minerals you need the most.

• Easily produce your own powerful medicines by growing anti-cancer plants and herbs using variations on these innovations, creating fresh raw medicines with almost no effort and at pennies a dose. (This technology can even be used for commercial production.) Various extraction technologies to concentrate the medicines will be under development in 2015 and released via open source.

• Remove all heavy metals from any water source used in these systems, including well water contaminated with arsenic. You’ll be able to download and print the heavy metals removal device (minor assembly required) and combine it with extremely low-cost media that I’ll teach you how to acquire locally (or even make your own from local raw materials). Through this innovation — which is based on a lot of the laboratory research I completed over the last 12 months — you’ll be able to grow food that’s virtually free of lead, cadmium, mercury, arsenic and even uranium and cesium. For background on all this, I’m also the inventor of the formulas described at www.CesiumEliminator.com and www.HeavyMetalsDefense.com as well as the creator of the heavy metals standards at www.LowHeavyMetalsVerified.org

• Quickly produce your own plant-based, high-bioavailability mineral supplements in less than five days, in your own home even without sunlight and using no electricity. This innovation creates food-based mineral supplements for mere pennies, at remarkably rapid rates, resulting in laboratory-validated high-mineral superfoods that you can eat raw, or dry into powders to be used as homemade mineral supplements. This is the ultimate self-reliant system for producing your own nutrition, totally off-grid — preppers and survivalists will love these solutions.

The best part about all this is that these innovations are being given away via the open source revolution that’s now reshaping the future of our world. Rather than trying to monopolize and corner the profits for these inventions, I am giving them away while encouraging everyone to share them as widely as possible.

As the world’s corrupt governments and illusory debt-based banking systems collapse, the solutions that will emerge from the collapse will be largely based on open source sharing of innovations for humanity. The greed-driven model of corporate domination and monopolization will be made obsolete by altruistic efforts of inventors and innovators who care far more about contributing to humanity than monopolizing profits and power.

Part of my goal with all this is to demonstrate these principles and thereby set an example of grassroots empowerment of the People from the bottom up. I am a Constitutionalist and hold absolute, unwavering belief in the Bill of Rights, the United States Constitution and the importance of checks and balances throughout (small) government to protect the People from tyranny and abuses of power.

Accordingly, this entire effort has received absolutely NO government funding, no grants, no subsidies, no university assistance and no handouts. This is an effort that’s 100% funded by the private sector and 100% based on individual innovation and decentralized solutions. (Read the free book FREEDOM! by Adam Kokesh if you want to understand the power of decentralized solutions for humanity.)

In the spirit of grassroots, decentralized innovation and solutions for humanity, everyone will be able to download these 3D printable parts and print these innovations at home, then assemble them and watch them work. To make all this work, you’ll only need a 3D printer and a high-quality filament (I’ll be recommending exactly which filament you need as we approach official launch day). For one of the parts in this system, you will also need a paper clip.

There is nothing you are required to purchase to enjoy the benefits of these inventions. No royalties must be paid to some evil corporation. No permission is needed from a corrupt government to have the “privilege” of printing these parts. You simply download, print and share the files with others. Then enjoy the radical improvements to your life that these innovations deliver: far lower food bills, disease prevention with the help of fresh medicine, pure water that’s free from contaminants and all the benefits of bioavailable mineral supplementation… and much more (as you’ll soon see).

Also, for those who don’t have a 3D printer or don’t want to print it, we will offer pre-printed editions of these inventions for purchase at a very reasonable price — kits that require minimal assembly. We will also support others who wish to print these for a fee and ship them to customers. (3D printing service bureaus.)

Learn more now at www.FoodRising.org

The full release of all this is currently planned for the first week of February, 2015. The new Lulzbot Mini printer is coming out in January or February and will be able to print all these designs. Other 3D printers from FlashForge and many other companies will also be able to print these parts quite successfully. I will ultimately recommend a printer as we approach the announcement date. I’m trying to acquire a Lulzbot Mini to test it and see if it’s worth recommending. If any other 3D printer companies want me to test their printers for compatibility with these designs, contact Natural News for instructions on lending us a demo unit.

I will not recommend Makerbot because of the company’s outrageous censorship of certain “things” it doesn’t want you to be able to download and print. Censorship has no place in the 3D printing movement. Do not support companies that try to control you and restrict what you can print.

Watch for more announcements on all this here at Natural News.

About the author:Mike Adams (aka the “Health Ranger“) is the founding editor of NaturalNews.com, the internet’s No. 1 natural health news website, now reaching 7 million unique readers a month.

In late 2013, Adams launched the Natural News Forensic Food Lab, where he conducts atomic spectroscopy research into food contaminants using high-end ICP-MS instrumentation. With this research, Adams has made numerous food safety breakthroughs such as revealing rice protein products imported from Asia to be contaminated with toxic heavy metals like lead, cadmium and tungsten. Adams was the first food science researcher to document high levels of tungsten in superfoods. He also discovered over 11 ppm lead in imported mangosteen powder, and led an industry-wide voluntary agreement to limit heavy metals in rice protein products to low levels by July 1, 2015.

In addition to his lab work, Adams is also the (non-paid) executive director of the non-profit Consumer Wellness Center (CWC), an organization that redirects 100% of its donations receipts to grant programs that teach children and women how to grow their own food or vastly improve their nutrition. Click here to see some of the CWC success stories.

With a background in science and software technology, Adams is the original founder of the email newsletter technology company known as Arial Software. Using his technical experience combined with his love for natural health, Adams developed and deployed the content management system currently driving NaturalNews.com. He also engineered the high-level statistical algorithms that power SCIENCE.naturalnews.com, a massive research resource now featuring over 10 million scientific studies.

Adams is well known for his incredibly popular consumer activism video blowing the lid on fake blueberries used throughout the food supply. He has also exposed “strange fibers” found in Chicken McNuggets, fake academic credentials of so-called health “gurus,” dangerous “detox” products imported as battery acid and sold for oral consumption, fake acai berry scams, the California raw milk raids, the vaccine research fraud revealed by industry whistleblowers and many other topics.

Adams has also helped defend the rights of home gardeners and protect the medical freedom rights of parents. Adams is widely recognized to have made a remarkable global impact on issues like GMOs, vaccines, nutrition therapies, human consciousness.

In addition to his activism, Adams is an accomplished musician who has released ten popular songs covering a variety of activism topics.

Click here to read a more detailed bio on Mike Adams, the Health Ranger, at HealthRanger.com.